How to inflate a sleep number bed without the remote

Do you use a sleep number bed, and you lose your remote, or your remote is not working. You might be worried about how to inflate a sleep number bed without the remote. Don’t worry. We will share everything you need to know about the inflating process.

Table of content;
What is the sleep number bed?
Can we inflate a sleep number bed with a mobile phone?
Is sleep number bed can be inflated manually?
What should you do if the remote does not inflate the bed?
Troubleshoot
Checking air pump
Can you reset the sleep number bed without a remote?
Is it possible to inflate my Sleep Number without using Wi-Fi?
How to fix the remote
Replacing sleep number bed remote
What if your sleep number bed is under warranty?
Is it beneficial to purchase a Sleep Number bed?
How much maximum weight a sleep number bed can support
Why is my sleep number bed sinking in the middle?

What is the sleep number bed?

It is an inflatable mattress that you can adjust as you want to get perfect support and pressure. It responds to your movements and automatically adjusts the firmness on each side. It is made with an adjustable air mattress. Sleep number bed also offers a dual-air adjustability feature which is best for couples. Couples can decide the firmness of their side of the bed and sleep comfortably.

Sleep Number bed uses these components;
Comfort foam
Air chambers
Mattress tops
There are two types of Sleep Number bed;
Value beds
360 smart beds

Can we inflate a sleep number bed with a mobile phone?

There are different ways of “how to inflate a sleep number bed without the remote.”
One of them is to use your smartphone to inflate the sleep number bed by using an app.

Sleep Number SleepIQ app:

You can use the sleep number SleepIQ app for inflating the bed. This app is available for both android and apple devices, and it is free to install. You have to simply install this app and follow these steps;

Turn on your phone’s Bluetooth from the phone setting and connect your Wi-Fi or turn on sim data.
Login to the sleep number SleepIQ app after downloading.

Click on the “Remote” option in the top right corner of the app.
Now, as you want to repair your bed, select the “Bed” option from the list after scanning is finished.
Now match the MAC address that shows in the app with your bed’s pump to make sure you connect with your sleep number bed. MAC address may begin with “CC” or “64DB”.

If there is no bed showing in the app to connect with, please make sure that the pump is plugged into the electric socket properly.
Now start inflating your bed. It will take roundabout 15 minutes to inflate.

Now, if your phone is connected with Wi-Fi, you can easily inflate it as you do with your remote.

Is sleep number bed can be inflated manually?

The answer to this question is “YES.” You can inflate a sleep number bed manually, and it will also not affect any warranty. How to inflate a sleep number bed without the remote looks like a difficult task, but it is very simple. Just follow the following steps;

Buy any low-pressure pump from the market. Try to buy an electric pump instead of a push pump.

Buy an adopter that fits the bed along with the low-pressure pump.

If you don’t find an adapter buy a duct tape. Duct tape will create a seal and will prevent air from coming out of the bed.
Unplug your bed to disconnect it from electricity.

Now connect the low-pressure pump with the bed and create a seal to prevent air from getting out.

Start inflating the bed with a pump. It will take approximately 15 to 20 minutes if the pump is electric.

Over-fill the air in your sleep bed just a little from the ideal amount because some air will go out when you disconnect the pump.
Connect back your sleep number bed with a plug.

What should you do if the remote does not inflate the bed?

Now you know how to inflate a sleep number bed without the remote, but what if you have the remote and it still doesn’t inflate the sleep number bed? This thing happens because the pump may have lost power, or there might be any blockage or twist in the pipe.

Check the pipe lines carefully from where the hose connects to the pump to the other end, and find out if there is any kind of blockage inside the line. Depending on the model of sleep number, a bed you have to disassemble some parts of your bed to follow the line. After disassembling, check carefully for any leakage, blockage, or twist in a pipe.

After checking the blockage of the pipe, if the pump is still not working, make sure to check again the wire is plugged in properly and the switch button is ON because sometimes the problem is most simple, and we ignore it. After all these things, if it is still not working, you have to contact someone professional to check the pump or replace the pump.

Make sure to check for a warranty. If it is under warranty, then you can replace or repair it from the company free of cost.

Troubleshoot:

You have to do some troubleshooting if your remoting is not inflating your sleep number bed. First, check carefully for any leakage from the pipe or mattress. If you find any leakage, try to fix it using duct tape.

There is also a chance of leakage if the pipe is not connected properly. Tight the pipe again properly to make sure there is no leakage from here. If you have moved your bed to reach the pump, it is possible that you might have kinked the hose line. This is a simple problem to resolve. Simply straighten the kink to allow continuous air flow in a pipe.

To make sure your pump is damaged or not, look for any light on the pump and check if it turns ON when you plugin or not. If the light does not turn ON, there is an issue in your pump that a professional can resolve.

Checking air pump:

Pumps are relatively simple to maintain. You can service the air pump for roughly 25 bucks or less if the motor is still in good working order.
When you remove the airbox apart for the first time, you’ll notice a circuit board and a compressor. Compressors rarely fail unless they are extremely old or under constant load.
It’s recommended to inspect and replace the connection outlets first.

Can you reset the sleep number bed without a remote?

Yes, you can reset the sleep number bed without a remote. You have to remove the inlet hose and place the cap supplied with the bed to prevent air from getting out. For 10 to 15 seconds, hold down both toggle switches at the same time, and your bed is reset. Place the hose back in its position, and you are ready to go.

Is it possible to inflate my Sleep Number without using Wi-Fi?

You don’t need to be online to change your Sleep Number base or setting. You must connect your bed to the internet in order for it to track your sleep or use Responsive AirTM technology.

How to fix the remote:

If your Sleep Number bed’s remote isn’t lost but isn’t working, you can solve the problem by following Sleep Number’s recommended instructions. They include information on every problem number and known issue, as well as how to link the remote with your bed.

These instructions are presented in both textual and graphic formats to help you understand the information. Search through their troubleshooting guides to find the most useful one for you.

Replacing sleep number bed remote:

Before ordering or buying a new remote for your sleep number bed, please make sure that the issue is in your remote, not in your pump or any other part. This ensures that you get the item you need quickly and avoids buying additional parts if the remote isn’t the issue.

Visit a Sleep Number retailer. You can purchase the model that you require right here. If the problem is covered by a warranty, you must contact support to have it resolved.

Once you’ve placed your order, the part will be mailed to you; double-check your address to avoid any delays. The new remote will need to be paired with your bed. A tutorial on how to do so can be found in the Sleep Number bed guide book. If you need to return a broken remote, contact customer support.

What if your sleep number bed is under warranty?

If your sleep number bed is under company warranty, then you should call customer care before ordering or buying a new remote. Also, check your warranty before creating a make-shift pump. This is because, according to the company warranty agreement, you are eligible for a replacement remote or even a new sleep number bed.

The company may send a representative to your location to confirm the problem and how to resolve it. However, the situation will be resolved in any case.

Remember that if everything else fails, you can contact support via email, phone, or live chat.

Is it beneficial to purchase a Sleep Number bed?

According to the latest mattress testing conducted by Consumer Reports, not much. In both categories, the best mattresses earn a good or excellent rating. In our tests, both the Sleep Number c2 Bed and the more expensive Sleep Number i8 bed Pillowtop gave excellent side and even greater back support throughout a range of firmness levels.

How much maximum weight a sleep number bed can support Because of its air mattress technology, it supports weight up to 400 KG.

Why is my sleep number bed sinking in the middle?

Given that most Sleep Number mattresses feature two air chambers (providing each user to personalize their side according to their preferences), the bed will be unequal and more prone to sinking in the center of one side is much firmer or softer than the other.

Conclusion:

In this article, I shared easy steps on how to inflate a sleep number bed without the remote. The quickest and most recommended way to inflate Sleep Number beds without a remote is to utilize the app. You can either acquire a replacement or purchase a low-pressure air pump for manual inflation if you don’t mind investing the money.
Remember to contact Sleep Number support if none of these solutions work for you or if you suspect another issue. You can contact us via email, phone, or live chat. They also offer a multitude of information available to search through from their knowledge base.